5811 SDS
===================================================================================================================
Section 1 -- PRODUCT AND COMPANY IDENTIFICATION
===================================================================================================================
PRODUCT NUMBER HMIS CODES
Health 2
5811 Flammability 2
Reactivity 1
MANUFACTURER'S NAME: ADDRESS:
Cumberland Products Incorporated 50 Commerce Parkway
Hodgenville, KY 42748
EMERGENCY PHONE : (800) 424 - 9300 DATE PRINTED : 11/27/2013
INFORMATION PHONE : (800) 223 - 1918
FAX NUMBER : (800) 500 – 9812
===================================================================================================================
Section 2 -- COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS
% by WT CAS No. INGREDIENT UNITS VAPOR
PRESSURE
===================================================================================================================
5 - 20% 123-86-4 n-butyl Acetate 11.5
ACGIH TLV 150 ppm
ACGIH STEL 200 ppm
OSHA PEL 150 ppm
OSHA STEL 200 ppm
20 - 50% 79-20-9 Methyl Acetate 162.70
ACGIH TLV TWA: 200.000 PPM
ACGIH STEL 250.000 PPM
OSHA PEL TWA: 200.000 ppm
OSHA STEL 250.000 PPM
20 - 50% 98-56-6 Parachlorobenzotrifluoride 5.3
ACGIH TLV N/E
ACGIH STEL N/E
OSHA PEL N/E
OSHA STEL N/E
< 1% 822-06-0 1,6-Hexamethylene Diisocyanate < .01
ACGIH TLV TWA: 0.005 ppm; 0.034mg/m3
ACGIH STEL N/E
OSHA STEL TWA: 0.02 ppm; 0.14 mg/m3
1 - 5% 28182-81-2 Hexamethylene Diisocyanate N/A
ACGIH TLV N/E
ACGIH STEL N/E
OSHA PEL N/E
OSHA STEL N/E
===================================================================================================================
Section 3 -- HAZARDS IDENTIFICATION
===================================================================================================================
ROUTES OF EXPOSURE:
Exposure may be by INHALATION and/or SKIN or EYE contact, depending on conditions of use. To minimize
exposure, follow recommendations for proper use, ventilation, and personal protective equipment.
EFFECTS OF OVEREXPOSURE:
Irritation of eyes, skin and upper respiratory system. May cause nervous system depression. Extreme
overexposure may result in unconsciousness and possibly death.
SIGNS AND SYMPTOMS OF OVEREXPOSURE:
Headache, dizziness, nausea, and loss of coordination are indications of excessive exposure to vapors or spray
mists. Redness and itching or burning sensation may indicate eye or excessive skin exposure.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE:
None generally recognized.
CANCER INFORMATION:
FOR COMPLETE DISCUSSION OF TOXICOLOGY DATA REFER TO SECTION 11.
===================================================================================================================
Section 4 -- FIRST AID MEASURES
===================================================================================================================
If INHALED:
If affected, remove from exposure. Restore breathing. Keep warm and quiet.
If on SKIN:
Wash affected area thoroughly with soap and water. Remove contaminated clothing and launder before re-use.
If in EYES:
Flush eyes with large amounts of water for 15 minutes. Get medical attention.
If SWALLOWED:
Do not induce vomiting. Get medical attention immediately.
===================================================================================================================
Section 5 -- FIRE FIGHTING MEASURES
===================================================================================================================
FLASH POINT LEL UEL
N/D F 0.9 16.0
EXTINGUISHING MEDIA:
Use National Fire Protection Association (NFPA) Class B extinguishers (carbon dioxide, dry chemical, or
universal aqueous film forming foam) designed to extinguish NFPA Class IB flammable liquid fires. Water spray may
be ineffective. Water spray may be used to cool closed containers to prevent pressure build-up and possible
autoignition or explosion when exposed to extreme heat.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Containers may explode when exposed to extreme heat. Application to hot surfaces requires special precautions.
During emergency conditions overexposure to decomposition products may cause a health hazard. Symptoms may not be
immediately apparent. Obtain medical attention.
SPECIAL FIRE FIGHTING PROCEDURES:
Full protective equipment including self-contained breathing apparatus should be used. Water spray may be
ineffective. If water is used, fog nozzles are preferable. Water may be used to cool closed containers to prevent
pressure build-up and possible autoignition or explosion when exposed to extreme heat.
===================================================================================================================
Section 6 -- ACCIDENTAL RELEASE MEASURES
===================================================================================================================
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Provide maximum ventilation. Only personnel equipped with proper respiratory, skin, and eye protection should
be permitted in the area. Remove all sources of ignition. Take up spilled material with sand, vermiculite, or
other noncombustible absorbent material and place in clean, empty containers for disposal. Only the spilled
material and the absorbent should be placed in this container.
===================================================================================================================
Section 7 -- HANDLING RELEASE MEASURES
===================================================================================================================
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
Keep away from heat, sparks, and open flame. Vapors will accumulate readily and may ignite explosively. During
use and until all vapors are gone: Keep area ventilated - Do not smoke - Extinguish all flames, pilot lights, and
heaters - Turn off stoves, electric tools and appliances, and other sources of ignition. Consult NFPA Code. Use
approved bonding and grounding procedures. Contents under pressure. Do not puncture, incinerate, or expose to
temperature above 120F. Heat from sunlight, radiators, stoves, hot water, and other heat sources could cause
container to burst. Do not take internally. Keep out of the reach of children.
===================================================================================================================
Section 8 -- EXPOSURE CONTROLS / PERSONAL PROTECTION
===================================================================================================================
PRECAUTIONS TO BE TAKEN IN USE:
Use only with adequate ventilation. Avoid contact with skin and eyes. Avoid breathing vapor and spray mist.
Wash hands after using. This coating may contain materials classified as nuisance particulates (listed "as Dust" in
section 2) which may be present at hazardous levels only during sanding or abrading of the dried film. If no
specific dusts are listed in section 2, the applicable limits for nuisance dust are ACGIII TLV 10 mg/m3 (total
dust), 3 mg/m3 (respirable fraction), OSHA PEL 15 mg/m3 (total dust), 5 mg/m3 (respirable fraction). Removal of old
paint by sanding, scraping, or other means may generate dust or fumes that contain lead.
VENTILATION:
Local exhaust preferable. General exhaust acceptable if the exposure to materials in section 2 is maintained
below applicable exposure limits. Refer to OSHA Standards 1910.94, 1910.107, 1910.108.
RESPIRATORY PROTECTION:
If personal exposure cannot be controlled below applicable limits by ventilation, wear a properly fitted
organic vapor/particulate respirator approved by NIOSH/MSHA for protection against materials in section 2. When
sanding or abrading the dried film, wear a dust/mist respirator approved by NIOSH/MSHA for dust which may be
generated from this product, underlying paint, or the abrasive.
PROTECTIVE GLOVES:
None required for normal application of these products where minimal skin contact is expected. For long
repeated contact, wear chemical resistant gloves.
EYE PROTECTION:
Wear safety spectacles with unperforated sideshields.
OTHER PRECAUTIONS:
Intentional misuse by deliberately concentrating and inhaling the contents can be harmful of fatal.
===================================================================================================================
Section 9 -- PHYSICAL AND CHEMICAL PROPERTIES
===================================================================================================================
PRODUCT WEIGHT 8.886 lb/gal 1065 g/l
SPECIFIC GRAVITY 1.060
BOILING POINT 0 - 282 F -17 - 138 C
VOLATILES 61.7 % by wt 61.8 % by vol
EVAPORATION RATE Same as ether
VAPOR DENSITY Heavier than air
REGULATORY VOC 1.48 lb/gal 178 g/l
ACTUAL VOC 0.71 lb/gal 85 g/l
===================================================================================================================
Section 10 -- STABILITY AND REACTIVITY
===================================================================================================================
STABILITY:
This product is normally stable and will not undergo hazardous reactions.
CONDITIONS TO AVOID:
None Known.
INCOMPATIBILITY:
Avoid contact with strong alkalies, strong mineral acids, or strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon monoxide, carbon dioxide, oxides of sulfur, oxides of barium, lower molecular weight polymer fractions.
HAZARDOUS POLYMERIZATION:
None Known.
===================================================================================================================
Section 11 -- TOXICOLOGICAL INFORMATION
===================================================================================================================
CAS No. Ingredient Name
-------------------------------------------------------------------------------------------------------------------
123-86-4 n-butyl Acetate
LC50 RAT 4HR >13.2 m/l
LD50 RAT 13400 mg/kg
79-20-9 Methyl Acetate
LC50 RAT 4HR N/E
LD50 RAT N/E
98-56-6 Parachlorobenzotrifluoride
LC50 RAT 4HR 22000 mg/l
LD50 RAT 13000 mg/kg
822-06-0 1,6-Hexamethylene Diisocyanate
LC50 RAT 4HR N/E
LD50 RAT 738 mg/kg
28182-81-2 Hexamethylene Diisocyanate
LC50 RAT 4HR N/E
LD50 RAT N/E
===================================================================================================================
Section 12 -- ECOLOGICAL INFORMATION
===================================================================================================================
ECOTOXICOLOGICAL INFORMATION:
ECOTOXICITY: No Information Available
ENVIRONMENTAL FATE:
MOBILITY: No Information Available
BIODEGRADATION: No Information Available
BIOACCUMULATION: No Information Available
PHYSICAL/CHEMICAL:
HYDROLYSIS: No Information Available
PHOTOLYSIS: No Information Available
===================================================================================================================
Section 13 -- DISPOSAL CONSIDERATIONS
===================================================================================================================
WASTE DISPOSAL METHOD:
Waste from this product may be hazardous as defined under the Resource Conservation and Recovery Act
(RCRA) 40 CFR 261. Do not incinerate. Depressurize container. Dispose of in accordance with Federal, State, and
Local regulations regarding pollution.
===================================================================================================================
Section 14 -- TRANSPORT INFORMATION
===================================================================================================================
US Ground (DOT) LIMITED QUANTITY
Proper Shipping Name: Consumer Commodity
NOS Technical Name: N/A
Hazard Class: ORM-D
UN Number: N/A
Proper Shipping Name: Paint Related Material
Hazard Class: Flammable 3
UN Number: UN1263
Packing Group: II
ERG: 128
===================================================================================================================
Section 15 -- REGULATORY INFORMATION
===================================================================================================================
U.S. REGULATIONS:
This product contains the following substances subject to the reporting requirements of Section 313 of
Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372:
SARA 313:
CAS No. CHEMICAL/COMPOUND % by WT
-------------------------------------------------------------------------------------------------------------------
822-06-0 1,6-Hexamethylene Diisocyanate 0.2
TSCA CERTIFICATION:
U.S. TSCA: This product and/or all of its components are listed on the U.S. TSCA Inventory or is otherwise
exempt form TSCA Inventory reporting requirements.
===================================================================================================================
Section 16 -- OTHER INFORMATION
===================================================================================================================
DISCLAIMER:
Do not handle until the manufacturer's safety precautions have been read and understood. Regulations require
that all employees be trained on Material Safety Data Sheets for all products with which they come in contact.
While we believe that the data contained herein is accurate and derived from qualified sources, the data are not to
be taken as a warranty or representation for which we assume legal responsibility. They are offered solely for
your consideration, investigation, and verification. Any use of these data and information must be determined by
the user to be in accordance with applicable federal, state, provincial, and local laws and regulations.
==================================================================================================================
ENVIRONMENTAL DATA SHEET
All data given below are MAXIMUM THEORETICAL VALUES based on the product AS CURRENTLY FORMULATED. Variations
may occur on individual batches due to adjustments made during production.
PRODUCT NUMBER
CP-5811
PRODUCT NAME
2.8 VOC Vintage Hot Rod Black (Satin) Regular Activator
PRODUCT WEIGHT SPECIFIC GRAVITY FLASH POINT
8.886 lb/gal 1.060 0 - 110 F
VOLATILE INGREDIENTS CERC. SARA HAPS PCT PCT
NAME CAS No. 313 112 by by
TC Wt Vol
-----------------------------------------------------------------------------------------------------------------
1,6-Hexamethylene Diisocyanate 822-06-0 X X 0.2 0.2
=================================================================================================================
VOLATILE ORGANIC COMPOUNDS
A. Coating Density 8.89 lb/gal 1066 g/l
B. Total Volatiles 61.8 % by wt 61.9 % by vol
Exempt Volatiles 53.8 % by wt 52.2 % by vol
Water 0.0 % by wt 0.0 % by vol
C. Organic Volatiles 8.0 % by wt 9.7 % by vol
D. Percent Non-Volatile 38.2 % by wt 38.1 % by vol
E. Regulatory VOC 1.48 lb/gal 178 g/l
Actual VOC 0.71 lb/gal 85 g/l
Solids 3.40 lb/gal 408 g/l
WASTE DISPOSAL
Waste from this product may be hazardous as defined under the Resource Conservation and Recovery Act(RCRA)40
CFR 261. Waste must be tested for ignitability to determine the applicable EPA hazardous waste numbers. The
addition of reducers or other additives to this product may substantially alter the above data. Since conditions
of use are outside our control, we make no warranties, express or implied, and assume no liability in connection
with any use of this information.